Storage Silos
Steel Silos
Steel Silo Making Equipments

HOME >> NEWS >> Technical and Making Equipment of Big Welded Silo

Big Welded steel silo core technologies:

1 2 discharge technology underlying technology Arima storage body mainly by the base plate, the base and the feeding system consists of three parts. Features are as follows:
A single large storage capacity: single library cement capacity from 5000 to 100,000 tons, the major companies have been put into use, running in good condition.
2, investment Province: ton storage investment compared to traditional concrete base savings of 30% -50%.
3, the library is high: a library rate remained stable at 95%.
4, process layout flexibility, use; according to the site and customer requirements can be flexible layout.
5, steel base ring to join welding using lap welding, the library board body with ring lap way to reduce the phenomenon of material storage wall, reducing the vertical friction. At the same time, an additional connection in steel or steel reinforcing plates, reducing the stress state library wall plate to improve the library wall steel stress situation.
6, a combination of steel interface that enables higher security library body, the structure is steel silo in the circumferential direction on a large interval of about one meter per set pricked bars, rings up as well as multi-channel stiffeners. This structure has a stronger shock resistance, resistance to deformation force libraries and libraries body bearing capacity.
    Device configuration:
1, the reservoir located a feed inlet
2, can feed chute, tankers into, belt and other means
3, the top of your library with a dust collection equipment, level gauge, safety valve
4, unloading, conveying air blower provides source, the material point with dust collecting equipment.